硬岩抗剪强度参数的最优化确定法

为了减小岩工程分析计算的工作量和节约研究经费,须利用有限的室内实验样本的测定值,通过对有限实验样本数据的回归分析整理,确定岩石抗剪强度参数c、φ,进而估计岩体的抗剪强度c、φ.由于试验方法、试验条件等有一定局限性,因而,岩石力学参数的试验结果具有一定的不确定性.其不确定性包含随机性和模糊性.而用传统的数理统计方法处理岩石样本值,显然是不合适的,只有通过寻求最优的数学回归分析方法,来处理相关试验结果.笔者通过对硬岩变角度剪切实验和常规三轴压缩实验的数据回归分析,得到利用最小二乘法的抛物线回归分析结果和随机-模糊回归分析结果比较符合.因而,为了优化计算结果而又避免繁琐的计算,通常可以采用最小二乘法的抛物线回归分析计算代替随机-模糊回归分析相关结果.     

加热法对石膏刨花板性能影响的研究

研究了加热温度和加压时间对石膏刨花板性能的影响。试验结果表明石膏固化时加适量的热量有助于提高石膏刨花板的性能;加热温度较高时石膏刨花板的性能比常温条件下压制的板的性能低。石膏固化时是吸热反应,石膏刨花板加压固化时,外加一定的热量有助于提高石膏的固化强度,因此板具有较好的物理力学性能。     

Influence of Ammoniacal Copper Quaternary treatments on mechanical properties of blue-stained Lodgepole Pine wood

Three concentrations （2.8%, 2.0%, 1.2%） of Ammoniacal Copper Quaternary （ACQ） was selected to treat Lodgepole pine wood for evaluating ACQ treatment on mechanical properties of blue-stained wood. The bending modules of elasticity （MOE）, modules of rupture （MOR）, toughness and shearing strength parallel to grain on tangential surface, are tested according to the criteria GB1927-1943-91. Non-treated sample were also tested according to the same procedure. The results showed that the three groups specimen impregnated by different concentrations of ACQ solution met the AWPA standard 2003 of America （UC4A 6.4g/cm^3）. There were significant difference of toughness between treated wood and non-treated wood （p=0.01）, but there were no statistically significant differences among three concentrations in terms of toughness, and toughness of treated wood was approximately 20% lower than non-treated. MOR, MOE as well as sheafing strength parallel to grain were found to be not significantly different between treated wood and non-treated one, and there were no statistically significant difference among three concentrations of ACQ too. Toughness, MOR, MOE and sheafing strength parallel to grain increased with decrease of concentration of ACQ, but they were hardly affected by ACQ preservatives.     

漆酶处理对未漂硫酸盐浆抗张强度和纤维表面的影响

探讨了漆酶处理对未漂硫酸盐浆抗张强度的影响,研究了漆酶处理的主要工艺参数对纸页湿抗张强度的影响;并采用扫描电镜(SEM)对漆酶处理前后纤维表面微细结构的变化进行了研究。结果表明,漆酶可以改善纸浆的湿抗张强度,但对于抗张强度不起作用;提高纸浆湿强度的最佳酶促反应条件为:酶用量16U(以每克绝干浆计),温度45℃,pH值4.5,处理时间2h。扫描电镜分析表明,漆酶处理使得纤维表面变得粗糙,纤维之间产生了黏结性,湿强度得以提高。     

初探水泥稳定砂砾的碾压机理施工方法

为保证稳定砂砾的密实度,采用以初压、振压和终压三个阶段碾压水泥稳定砂砾是合理的、必 要的,也是科学的。     

简述钢管混凝土

介绍了钢管混凝土结构的特点、研究现状及其工程应用。     

羧基丁苯胶乳改性脲醛树脂胶粘剂的研究

利用羧基丁苯胶乳对脲醛树脂胶粘剂进行改性,同时在脲醛树脂合成过程中加入一定数量的玉米淀粉等改性剂,进一步提高改性脲醛树脂的综合性能,降低生产成本。羧基丁苯胶乳改性脲醛树脂胶粘剂具有游离甲醛含量低、生产工艺简单等特点,生产出的胶合板的胶合强度和甲醛释放量均满足国家标准。     

西南桤木木塑复合材料的研究

采用乙烯基类系列单体——丙烯腈(AN)、甲基丙烯酸甲酯(MMA)、丙烯酸(AA)三元共聚单体注入西南桤木木材中，制成新型的高分子复合材料(AMA—WPC)。单体的注入用满细胞法，聚合用热引发法，并采用添加氯化锌对木材细胞壁进行活化等工艺对木塑复合材进行了研究和分析。实验样品按照国标GBl927—1943有关规定进行测试，并结合傅立叶红外光谱和扫描电镜探讨了各因素对AMA—WPC材料接枝率及性能的影响。结果表明：改性后西南桤木木塑复合材料具有优异的物理、力学性能。与素材相比较，AMA—WPC的密度提高了59．8％，顺纹抗压强度提高了76．7％，抗弯强度提高了90．4％，抗弯弹性模量提高22．2％，端面硬度提高102．3％，径面硬度提高153．6％，弦面硬度提高152．2％，吸水率降低56．7％，湿膨胀率降低19．0％。     

Evaluation of Strength Performance of Finger-jointed Lumbers Using Three Kinds of Nondestructive Techniques

Resonance flexural vibration（Fast Fourier Transform, FFT）, ultrasonic wave（Pundit） and stress wave（Metriguard） techniques were examined as means of evaluating the static modulus of elasticity （MOE） and predicting the modulus of rupture （MOR） of finger-jointed lumber specimens made with four kinds of Eucalyptus （Eucalyptus. citriodora, E. exserta, E. grandis x E. urophylla and E. grandis）. Dynamic MOE was calculated from frequency and time obtained from forced vibrations and sounds induced in the four species of finger-jointed specimens. It was found that correlation coefficients between density and static MOE and dynamic MOE were statistically significant at the 0.01 level. And it was also found that the three nondestructive techniques can provide rapid and accurate means to determine the MOE, and the dynamic MOE was more accurate to predict static MOE than density. But the correlation coefficient between dynamic MOE, static MOE and MOR were lower than results reported by other researchers for solid wood, and were not statistically significant. It can be concluded that the three nondestructive techniques are useful for evaluating the MOE, but not suitable for predicting the MOR of finger-jointed.     

胶合板胶合效果评价方法探讨

现行胶合板标准采用传统的胶合强度指标(含木破率)评判胶合板的胶合性能具有一定的局限性。本文通过对胶合板胶合强度的分析和胶合界面的观察，包括显微观察，提出以胶合有效性、木材破坏率和胶合层剪切弹性模量或其综合评分为衡量指标，是评判胶合板胶合效果较为客观的方法。